AnsweredAssumed Answered

AD9467 Microblaze GNU/Linux boot problem

Question asked by -2dbc on Sep 10, 2015
Latest reply on Sep 11, 2015 by -2dbc



My ethernet connection problem was solved in my previous post  but I have a new problem.

I can monitor pure sinus signals on IIO-Oscilloscope over ethernet yesterday.

Today, I programmed FPGA again and I had a new error.

AD9467 is connected to FMC LPC.

I tried same process again and again, result is same.

I'm using

Some lines of dmesg result:

WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:303 dev_watchdog+0x1c4/0x24c()

NETDEV WATCHDOG: eth0 (xilinx_emaclite): transmit queue 0 timed out

Modules linked in:

CPU: 0 PID: 0 Comm: swapper Not tainted 3.19.0-gef29f1f #1

In conclusion, Host can not connect to board over ethernet.

I attached all of dmesg result.