hello. i'm luis
I have a question about adv7611 edid. I used adv7611 with no hdcp.
I wanna an external device(ex. divx) access adv7611 edid register.
how can I ?? please advice me.
EDID is loaded into the ADV7611 over the I2C bus that controls the part, the source downloads the EDID over the DDC lines. So if you have direct access to the ADV7611 you should have direct access to the EDID.
If you are trying to get it from the source side, then the EDID block is available at address 0xA0 on the DDC bus.
Retrieving data ...