for my Masterthesis I implemented a custom IP in the reference design. Now, I am confused about the output at the IIO- Oscilloscope. I am transmitting binary data to the DMA but at the oscilloscope I am seeing triangular shapes instead of rectangular shapes.
I added two figures below to show the problem. The first figure shows a section of my received message. On top is the message I saved from the IIO-Oscilloscope. It seems that the DMA adds zeros between every received Bit. Below is the message how it should look like.
In the second figure is a section of the output of the IIO-Oscilloscope. It is showing the triangular shapes I am getting.
Is there an opportunity to fix this problem?
Thanks for your help