AnsweredAssumed Answered

How to Initially Loading U-Boot with Visual DSP++ ADI ICE

Question asked by liuyusong on Apr 25, 2011
Latest reply on Apr 27, 2011 by CraigG

I want to load u-boot into the bf533ezkit , and I have read this page: http://docs.blackfin.uclinux.org/doku.php?id=bootloaders:u-boot:loading

but I also cannot load the u-boot to the board.

I had complied the u-boot , I chose the u-boot.ldr to load , am i right?

I use the Flash Programer of the Tool menu , load the BF533EzFlashDriver.dxe first , then select "Erase All" and Binary type , and offset is 0x0.

then click on the Load File button.when it completed , I closed the VDSP , power off the board and uconnected the ICE-100B , I cannot see anything !!!

The com port baud rate is 57600 , 8 bit , 1 stop bit .

I had tried several times , nothing showed up!

I really want to konw What is wrong ?

Outcomes