Have you any latest software update for Vibration Evaluation as this Vibration Evaluation tools unstable during my operation?
Thank you very much.
Thank you for your post. I am sorry to hear that this has been a challenge but we haven't experienced a lot of stability issues with this package and the ones that have been reported have been difficult to isolate from other potential causes (loose connections, PC-level issues). What version are you currently using? Would it be possible to offer a description of your experience, which has enough detail to equip our software designers to duplicate your observations? Which version/service pack of Windows?
my O.S is Windows 7 service Pack1, and EVB tool software version is Vibration_Evaluation_1.3.0.
my facing case, I can't Capture input data information during GUI operation. I need to turn on/off GUI several time, and then capture input data information appear.
something, the GUI tools is hang on. I need to turn off/on GUI tools.
Thank you! This is a good start. Which product are you trying to evaluate? Can you offer a screen shot of the program before the point it crashes and of the error message (or more details) that you observedwhen it crashes?
I found it is much hard to find sensor note during sensor added or scan network of Network setting of GU.
I needs to turn on/off kit many time. it found device fail over 80%.
I had gotten ADI Vibration EVB kit, and sensor note supply voltage 3.3V either mainboard or battery.
I had reference below link to setup this kit.
Thank you for offering this detail. Until now, I didn't realize that you were using one of our unofficial demo kits for the ADIS16229. One of the most common issues we have seen has been through the power connector on the ADIS16229 and through interference between the ADIS16000 and ADIS16229. You could solder the power connector on and also use a SMA cable to eliminate interference as a possible contributor to these issues.
As I have no SMA power connector on hand, I tried to solder two wire 3.3V and GND and then connect to power supply as below pictures.
Unfortunately, the ADIS16229 sensor note still can't be find easily by ADI GUI.
I am sorry that this has been a hassle for you. Since you have eliminated power connection as a possible contributor, the next thing would be to address opportunity for interference. Here is an example of the cables that we have used to help address interference in some of our demos.
Retrieving data ...