Dose ADV7482 can adjust the THS-TRIAL by register?
thanks for your help.
I don't think there is any register to adjust this but I will confirm with the specialist.
Is there any news for this function?
Thanks for your help.
Sorry ! Did you got any register table for this adjustment?
Unfortunately the adjustment of THS-TRAIL is not available.
The recommendation would be to reset the MIPI CSI-2 Rx after powering down the ADV7482 MIPI CSI-2 Tx, as in the following recommended sequence from the Hardware Manual (section 9.5.3):
9.5.3 Changing Configuration or Input Video Resolution
The recommended sequence when changing MIPI CSI-2 Tx configuration and/or input video resolution is listed below.
1. Follow the power-down sequence.
2. Reset the MIPI CSI-2 Rx.
3. Change the MIPI CSI-2 TX configuration and/or change the input video resolution.
4. Follow the power-up sequence.
We need to adjust this timing to avoid SOC enter the Lower Power mode due to miss detect THS-TRIAL.
In customer experience , it can be improve by this adjustment.
Thanks and waiting for your good news.
Retrieving data ...