I would like to replace the current analog accelerometer on a design with the adxl362.
The micro is a PIC 16LF818 using the INTRC clock = 31.25 KHz.
So, the fastest I could run the adxl362's SPI SCLK would be 31.25 KHz/4 = 7.8125 KHz.
Does anyone know if this frequency is too slow for the adxl362's SPI SCLK?
I saw in the Rev C data sheet the recommended clock frequency range is 1 MHz to 8 MHz.
But, Table 10 in this same data sheet does not list a minimum for this clock frequency only a maximum of 8 MHz.