AnsweredAssumed Answered

How to route an input to a desired output using the registers?(ADAU1452)

Question asked by fevzi on Jul 13, 2015
Latest reply on Jul 17, 2015 by DaveThib

My aim is to route an input to a desired output using the registers. I read the data sheet (page 104) and despite setting SOUT_SOURCE to 011 I can't get it to use input channels 0 & 1. It works fine when 001 an 010.

Note: I am using an ADAU 1452. And the block above the intput and output 0 is just to generate a sine wave. I have shorted the sine wave from the outputs 16 & 17 to the first input jack with a cable. post_pic.png

Outcomes