I'm trying to run the reference design with my HW setup, which is composed by
Microzed FMC carrier
I updated the HDL to have only TX, RX and SPI channels (I removed I USB, HDMI and audio channels).
I attach the constraint file I'm using.
I left the FMC carrier board with default configuration (FMC GA0/1 = LOW, VADJ=1.8).
Since I unsuccessfully tried with linux (crashes while loading the ramdisk), I tried with no-os driver.
Here I get
ad9361_init : Unsupported PRODUCT_ID 0xFF
I suspect an error in the constraint file or a wrong board setup.