i am currently using the ADV7842 and i'd like to adjust the HSYNC start and HSYNC that is being processed by the CP. I am looking to confirm that the registers within the CP would be as follows:
0x7C, 0x7D, 0x7E
i see from the software users's guide (http://www.analog.com/media/en/technical-documentation/user-guides/UG-206.pdf) that the bits i need to control are HS_START and HS_END.
i just want to confirm that these are the correct registers to manipulate. the reason i want to manipulate them is to generate a custom format that is not listed in the current recommended register settings/scripts.