The datasheet states that for the BF548 VDDMP can be connected directly to VDDINT. In the ez-kit there
a ferrite and some caps are used - is this necessary or can it be directly connected?
If you are using MXVR the ferrite bead and capacitance are recommended in the MXVR Board Layout Guidelines section of the ADSP-BF542/ADSP-BF544/ADSP-BF547/ADSP-BF548/ADSP-BF549 Blackfin Embedded Processor Data Sheet . If you aren't using MXVR, then connecting VDDMP directly to the VDDINT supply is recommended.
Retrieving data ...