i am using ADAS1000 , for pace detection there is 3 registers , PACEEDGETH, PACEAMPTH, and PACELVLTH registers,
and 2 filters on/off.
the problem is what is the usage of LVLTH register
and when i tune the pace to detect low values (as 1mV,0.5ms) the filters cant detect hire values or other pace characteristics
the stander say that pace values varies (ECG signal in the presence of pacemaker pulses with amplitudes of ±2 mV to ±700 mV and durations of 0,5 ms to 2,0 ms.)
what can i do for configure the adas to cover all that range (amplitudes of ±2 mV to ±700 mV and durations of 0,5 ms to 2,0 ms.)