It appears that I have tried every combination of EDID settings possible for the ADV7625/26/27 family and I cannot get it to work properly. I have a signal generator connected to the HDMI input and an the output of my ADV7627 is connected to a television. My signal generator allows me to see the EDID and its one big mess.
When I read the EDID through I2C from the ADV7627, I get the correct EDID, so it is being saved.
But my television sees the header 00 FF FF FF FF FF FF 00 and after that its just FF all the way down.
Besides the downloadable files on Analogs site/forum, are there any recommended EDID settings to make it work?