When I run application for ADUCM evaluation board I get the following error:
There is no ADuCM350 with EKSP firmware detected on this port.
This may be because there is not firmware loaded onto the board
OK but this is new board and how can I upload the correct firmware. I did not see anywhere in documentation guide how to upload "EKSP firmware" ?
Have installed the SDK?
If so you can use the tools to download the firmware "aducm350_eksp.hex", in the EKSP folder with the tools to the board.
If not, please install the SDK and make yourself familiar with the provided tools to download firmware to the board.
Please also see other FAQs here on the EngineerZone.
Please reference the Evaluation Kit Software Platform FAQ which should answer your questions. Please also see the document attached to that FAQ.
First, thank you for your replays and help. I searched, found and uploaded firmware.
Second, I think that so important information about kit is not the right place FAQ section of online forum. It should be written in User Guide of evaluation board. I am more than 15 years in R&D business and this is first time I see such a thing.
Thank you again
Glad you sorted the problem. Thank you for the feedback on the location of this information. We will review our documents and consider your proposal.
Retrieving data ...