I have a problem here, please help.
I have a RGsB(Sync on Green /embedded sync) 625i signal , no CVBS! and have to convert it to 12bit 4:4:4 RGB DDR or 20bit 4:2:2 YcrCb and than back to RGsB.
I’m working with evalboard ADV7181CEB and have troubles to configure Decoder 7181C right. I used some configurations from example scripts(ver.3.2c), but:
What PRIM_MODE should I choose?
I think COMP=>0001, VID_STD=>0011, but in most example scripts is chosen SD-M=>0000, VID_STD=>1011? Is that right?
May be you have any recommendation scripts?
Mux Config: C3=>46 ; C4=>85 Right ?
Any help would be greatly appreciated.
Sorry for bad English.