Looking for details about AVI 168-pin connector and it mating connector.
Pointers pls ..
I was able to get the vendor who makes them-- you could probably order them as a custom build too: http://www.oupiin.com/sampleDetail.asp?id=431
What connector are you taking about?
Actually I want info about AV Connector used in ADV7604 Evaluation boards.
I am referring [http://ez.analog.com/servlet/JiveServlet/download/1545-10-3560/ADV7604_Evaluation_Board_UG_RevPrA.pdf]
Page 4 Fig1.
I plan to buy ADV7604FEBZ board. But will be designing a custom interface board instead of "Motherboard"
Hence looking for AV connectors details, (which I wrongly typed as AVI Sorry for the confusion)
There is no documentation specific to the connector available. You have the pinout from the schematic and I think the BOM for that board is there too-- so you can get the part number. Are you just looking for the part number for the mating connector?
Couldn't find BOM at http://ez.analog.com/docs/DOC-1545
I hope I have not missed something there...
Let me know if you get to know.
I should be able to find the part numbers and post them.
Some bad news. I found out that connector and it's mate were made special for the group that did that board. They aren't commercially available. It's probably not realistic to make something to mate to it versus just making a board with the ADV7604 on it.
Thats a bad news indeed!
Will go for making a board.
I am fairly new to this HDMI stuff. So was keen on using off-the shelf boards for prototyping.
I will follow-up with those guys
Retrieving data ...