Here is what i've done:
- I've tried to run Video Input-Output (C) example on ADSP-BF561 board, and I have some problems.
- I've set the switches as you said in the readme.txt from the project.
- I've loaded the project on the board.
- I've connected a video camera to the video-input (bottom right connector of J6) you specified in the readme.txt
- I've connected the output from the board (top middle connector of J6)
Now, the problem is that the output is black&white and from time to time it loses some frames.
I suspect that some sincronization need to be done. Can you tell me what the problem is?
Thank you very much!