We are using the USB code downloaded from Analog Devices.When we build the code and run it from VDSP tool the USB device is detected in Device Manager. We are running the code on BF525 Processor and Windows XP.
We are creating the Ldr file for the code and flashing the code on SPI-Flash memory.
The device is detected only once when it boots from the Flash memory.
When we switch OFF the camera and switch ON the camera the device is not detected in the Device manager.Again if we flash the same code to the flash memory the USB device is detected.
Please let me the cause for this problem and the steps to rectify this problem.
Looking forward to hear from You