EKIT01-HMC830LP6GE is used.
I would like to use Manual Override and I would like to output 160MHz by Integer Mode.
Software:PLL Eval Software V3_2_4_0 and V3_2_5_0(The problem has occurred by both.)
==The first confirmation==
The current value of the power supply is confirmed (current value of the stabilizing supply).
=>[I do not remember an accurate value but 0.2-0.3A]
It confirms it by 00h register reading with this software.
=>[Device ID A7975]
Writing and read backing to 02h register
=>[The read buck value is a written value.]
Please teach me Manual Override setting.
I tried it but it is not good.
Please check attachment file.