What is the output Level of the ADV7393 for CVBS PAL.
Is it a level of 1V?
what impedance does it have 34.5 or 300 Ohm?
Is it possible to drive a 75Ohm line directly?
When Rset = 510 Ohms, the DAC outputs expect to see a 37.5 Ohm load. The load consists of a 75 Ohm resistor to ground right next to the pin and a 75 Ohm resistor to ground at the sink. Normal cables plus sinks are set up this way.
When configured this way the output will be 1Vpp
Retrieving data ...