Add your comments about the Circuit Note found at http://www.analog.com/en/circuits-from-the-lab/CN0150/vc.html.
Questions or comments about CN0150, leave us your feedback here.
I'm looking at the CN0150 Design Support Package ( http://www.analog.com/CN0150-DesignSupport ).
- These are Cadsoft Eagle files, but Schematic and Board don't match.
- What is the licensing status of these files? Are they copyrighted by Analog Devices? Or are they in the public domain?
Electrically the board and the schematic are the same. When the schematic was originally drawn in EAGLE it was drawn on a single sheet. After the board was routed, the schematic was modified by separating functions on different sheets. When this happened, EAGLE lost the link between the board and the schematic.
I've got the original copy of the Rev. C schematic which is drawn on 1 sheet and still linked to the board.
You can temporarily download this Design Support Package at the following URL:
I'm trying to get this eval board going according to the documentation at BeMicro FPGA Project for CN0150 with Nios driver. Unfortunately Micrium uC-Probe version 2.5 isn't available anymore. The current version, 3.5, doesn't seem to recognize the ".wsp" file and only wants to look at ".wspx" files. I've tried changing the extension but that just results in an error upon loading the file. The ".elf" file loads without any issues.
If the version is the issue, would it be possible to migrate the file to work with the current release? I'm not familiar with the package and don't know if it would be a matter of a few clicks or a significant hassle.
Retrieving data ...