I'm working on the Dolby/DTS audio with ADV7614. I'd like to what's the correct settings in ADV7614. All the video/audio signal is via the HDMI I2S.
The audio is Dolby TrueHD, and the value I got from HDMI map offset 0x18 is 0x78, which means high bit rate (HBR). After this is confirmed, what should I set? Should I set HDMI map offset 0x01, bit OVR_MUX_HBR to 1?
How about the Dolby Digital 5.1? Is the settings the same as Dolby TrueHD?