My customer needs the gerber files for:
Can you provide them?
I attached the Gerber files for both the HMC424LP3 and HMC547LP3 Eval boards.
For your information, the HMC424LP3 is reaching its end of life. We recommend you to use HMC424ALP3 in your new designs.
The HMC424LAP3 is in the same package/pin outs and support the same operating conditions and electrical specifications as the HMC424LP3, targeted as a drop in replacement.
Gerbers for amplifiers HMC565LC5 and HMC903LP3 are attached herewith.
Gerbers for other 2 parts will be added by my colleagues.
Please note there is no material for hmc565lc5 (LC5).
I checked again, the necessary mfg files for HMC565LC5 EVB are in `109001-1.zip`.
It’s for LP5 package not LC5 (HMC565LC5)
The attached mfg files are for HMC565LC5 Evaluation Baord (EVB) with part no `109001-1`.
The part no for the EVB can be seen on the DS` `Evaluation PCB` page on the EVB drawing itself, or at the `List of Materials` section.
If you need mfg files for a different board, please check the EVB part no on the DS, then I can provide files for that EVB for you.
Retrieving data ...