we just got a demo board ADV8005, we can get only one input to work
we can not get the osd demo to load or display
Any one have a sample movie, or good manual how to test all the functions of the board
The ADV8005 user guide and 800x_System_Commands document is available in the below path
Advantiv™ EVAL-ADV8005-SMZ Video Evaluation Board
You can refer these documents and verify the functions of ADV8005.
The main binary we provided on the EVAL-ADV8005-SMZ support page uses ADV7625 HDMI input (JT11) as the primary input and allows ADV7842 HDMI input (JT12) as secondary input.
I assume you have the ADV7625 HDMI input working. You should be able to use the RS232 commands to show the ADV7842 HDMI input in a window.
I would suggest using an HDMI generator for the ADV7842 HDMI input so that you can know all of the details of the HDMI signal that is coming out. Also, you might want to start with a resolution like 480p60 and work your way up.
Here are the steps I used to verify this functionality earlier last year:
1. 3840x2160 @ 24 to ADV7625 HDMI (JT11)
2. 1080p60 to ADV7842 HDMI (JT12)
3. turn on the power, verify that 4K video provided to JT11 is output on JT4.
5. pipvic 16
6. pipmode 5
8. pipmenu off
I would suggest starting with this.
Did this work for you?
Retrieving data ...