AnsweredAssumed Answered

CCES BF537 Flash Programmer Error

Question asked by tamirci on Jan 21, 2015
Latest reply on Jan 24, 2015 by tamirci



I have been developing by VisualDSP++ for years. But i changed it to CCES before a few months. But i was still using VisualDSP++ flash programmer utility. Now it has no license i need to use CCES flash programmer way which is a dos command. I executed my command as below but it returned with an error which i m not familiar with. Flash is M29W320EB.


Microsoft Windows


C:\Users\user>cd C:\Analog Devices\CrossCore Embedded Studio 1.0.3


C:\Analog Devices\CrossCore Embedded Studio 1.0.3>cldp -proc ADSP-BF537 -emu 100

B -driver "C:\Analog Devices\CrossCore Embedded Studio 1.0.3\Blackfin\ldr\ezkitB

F537_initcode.dxe" -cmd prog -erase affected -format hex -file "C:\Users\user\Do

cuments\CrossCore Embedded Studio\RadNET\Debug\RadNET.ldr"

Target          Blackfin Emulators/EZ-KIT Lites

Platform        ADSP-BF537 via ICE-100B

Processor       ADSP-BF537

Driver          C:\Analog Devices\CrossCore Embedded Studio 1.0.3\Blackfin\ldr\e


Error: failed to resolve symbol "AFP_BreakReady".

Error: driver load failed.


C:\Analog Devices\CrossCore Embedded Studio 1.0.3>


I have no time to investigate on it and look up to the documents to find root cause.


Could you please advice on this?


Best regards,