AD8145 operates from +5V & -5V
ADV3201 operates from +3.3V & -3.3V
In case without negative supply powered on the both the IC's, What will happen the IC?
What is the maximum delay can maintain for both supplies are raise?
Using only negative supply to power the AD8145 and ADV3201 can be done as long as it is within the supply ranges I mentioned on the previous post but some of the internal circuitry of these ICs will not work properly because these internal circuits were designed to operate in either single positive supply or dual supplies. Also, using negative supply will not provide you proper output signal.
It is better to follow the recommended supply voltage ranges indicated in the datasheets in order to get your desired output.
I am forwarding this to the AD8145 and adv3201 expert
AD8145 can be powered by a single supply of up to 11V ( operating max). While ADV3201 can be powered by a single supply of only up to 6V (operating max). You don't have to worry about the negative rail because these parts are designed for both dual and single supplies.
Nice to hear from you.
In case without positive supply applied only negative supply, what will happen on AD8145 and ADV3201?
Retrieving data ...