Is it possible to use ADN2915 for 2Mbps data rate somehow? Are there any more suitable CDR solutions from Analog to work with data rates in a range of 2 to 20Mbps?
In the lab evaluation, we did not evaluate the data rate slower than 6.5Mbps so the datasheet
only recommended the lower data rate down to 6.5Mbps.
In fact, communication carries below 6.5Mbps are:
T1 = 1.544Mbps
T2 = 6.312Mbps&
E1 = 2.048Mbps.
Do you want to support these carries?
If yes, welcome to evaluate ADN2915 at these rates with PRBS7.
Thank you for the answer!
The application I am working with is actually outside the standard communication domain, so it will be a non-standard frequency.
I have suspicion that the clock may lock at first available higher harmonics if input goes below 6.5MHz, but I will try to get my hands on development kit somehow and make some tests.
Retrieving data ...