I have a question about fast lock mode (fast switch mode) of ADV7282-M.
You say about it as follows at the sled:
>In fast switch mode the ADV728x can only connect to NTSC, NTSC4.43 or PAL-I signals.
Please tell me about it.
If input except NTSC, NTSC4.43 or PAL-I is selected, do we have to set FL_ENABLE to 0?
Or even if input except NTSC, NTSC4.43 or PAL-I is selected, is it OK that FL_ENABLE is kept 1?
(In this case, is it the fast switch just invalid and no problem?)