I have a simple question on the EVAL-CED1Z board: what is the mating connector part number for J7 the analog power connector
TE CONNECTIVITY / AMP - 5-104809-7 can be an alternative, please check it.
5-104809-7 .100 AMPMODU Headers, Housings & Contacts - TE
The J7 connector is suitable for termination to 26/28 AWG stranded ribbon cable or dip solder terminations.
Thanks for the answer. What I need is a manufacturer's part number for the mating connector for J7. I see in the users guide there is a picture that shows ELCO as manufacturer for J7, also there is a table with various connectors with part numbers (J7 is not included). Perhaps there is a bill of material for the EVAL-CED1Z available that would show J7 part number?
J7 is an Elco 108284008000030 8 Pin 0.1" pitch Shrouded Header. The response above is from its datasheet when I looked it up for possible mating connectors.
Retrieving data ...