In the Evaluationboard User Guide ( UG-636) is written, that GPIO MP5 is on TP38.
If I look on the schematic of UG-636 : TP38 is analog input channel ADC1LN.
Is the table 4. Multipurpose pins , GPIO's on page 16 wrong ?
I traced the GPIOs by sending them known waveforms as shown below:
Any idea ?
I'm having the same issue and problems---in fact I can't get any of the GPIO pins to work at all, though the a AUX ADC stuff works fine..
Thanks very much. Now it works.
Retrieving data ...