AnsweredAssumed Answered

Specification of the ADV7513_AVdd and PLVdd

Question asked by Tak-8810 on Nov 4, 2014
Latest reply on Nov 5, 2014 by GuenterL

When I check the maximum value of AVdd and PLVdd in 11 pages of HARDWARE USER'S GUIDE of ADV7513, it has been described as "Refer to Section.7.1".

We can not be confirmed that relationship of the rms and frequency because we don't have measurement environment.

When I checked the signal that filtering by low-pass filter of 20MHz, noise of about 5mVpp is adding.

Can I confirm whether meets the provisions of the device only by Peak-to-Peak of voltage?


If this is possible, please let me know that specified value.