I use host MCU to send the code and parameter control information through SPI. The IC is 21469.
How do I use MCU to read the Limiter module's active/inactive?
Thanks for your help
The second pin on the output side of the Limiter (Dynamic Processors->RMS->Limiter) shows whether the Limiter is active or inactive. Connect it to a read-back module. Create a SS_CMD_CMD3 readback packet (refer to section 5.2 of SigmaStudio_for_SHARC_HostControllerGuide.pdf) to send a read request from the MCU and readback the value of Limiter active/inactive status.
It will be better for you to attach your schematic project to show out what "limitter" module are used.And that will help offer you specific and targeted answer.
Retrieving data ...