Is there any example for a communication between two(2) FMCOMMS1 with zedboard attached. I have read a from matlab but it used Virtex-6 ML605.
Unfortunately, the MATLAB support package is hardware specific. You have to use ML 605 with it. Zedboard will not work.
A zedboard has only 1 FMC LPC how are you planning on connecting two FMCOMMS1 boards to it?
Actually, I have bought 2 zedboards and each attached with FMCOMMS1 board respectively. I'm sorry for the message that I sent it before.
Ok now we are going somewhere.
You have two completely independent systems.
What are you trying to do? Do you want to synchronize the two Zedboards or FMCOMMS1 boards?
You know they can simply be working together without anything else.
You can transmit from one and receive on the other.
I guess maybe you can tell us more what you need to do.
Thanks for the reply.
I want these two boards of FMCOMMS1 can communicate to each other (synchronized) over the air. I have found one of the resources that use matlab, Support Package Hardware Setup - MATLAB & Simulink, but it use different Xilinx board, ML605, which supported by matlab. Can I use this matlab but use different board such as zedboard. for transmit and receive.
Retrieving data ...