I am referring to the interface registers:
Are they available in ADAU1761? If yes, what are their register addresses? If not, then why do they show up as an option when the ADAU1761 framework’s loaded?
Hello Xun Shi,
The register addresses are detailed in table 32 in the datasheet. It is located on page 50.
It's the GPIO Register address and not I want to know the Interface wirte or Interface read address, please help check again, thanks for your kindly help.
The 1761 does not have interface registers. We added, what the tools shows as interface registers simply to mimic the behaviour of the 1701 and allow users to replicate similar schematics however the need for a microcontroller to save those values is still needed. In other words, the writeback mechanism that the the 1701 used to performed when using interface registers is not present in the 1761.
Let me know if this is clear.
As diagram show, I want to confirm if use the Interface Write/Read function must cooperation with a MCU and SigmaStudio will assign register(In RAM address 0x0008 ) at simulation model? Thanks for your kindly help.
Retrieving data ...