Please tell me the attached circuit.
(1) If we use TTL or CMOS input, should we input +5V or 0V into Vz?
(2) If we use TTL or CMOS input with +5V or 0V, can we get 0V or -5V output?
Best Regards, Tomo
I'm so sorry for my late response.
The HMC424LP3E is negative voltage controlled. For the hex inverter IC in our recommended driver circuit to provide control voltages -5V/0V, the Vcc pin should be connected to gnd/0V and the Gnd pin should be biased to -5V.
Thank you for your answer.
Retrieving data ...