I got one question from our customer.
I would like to confirm for Xtal clock oscilation of ADV7280.
User Sub MAP address 0x0F: 0x20 / default
step-1 : Write 0x80 on there
(Cleared bit7==> This have been shown on your datasheet.)
step-2 : Waiting 5msec
step-3 : Doing some action
But ADV7280 could not start to oscilate.
After above condition, our customer could be oscilated ADV7280 after put 0x00 on adress/0x0F.
Does this way correct or not?
Please give me your advice for this.