I would like to know if the EVALZ-ADI-BERT comes with an SDK, or some means to automate it from say Labview, or C# or any other programming language?
ADI-BERT is one box to demonstrate the ADN2915 features including PRBSgeneration, PRBS error detection, and the other capabilities.
The ADI-BERT control GUI is a Labview application.Because of license limitation, we offer an executable code only at the moment.
If you are interested in developing your own control GUI, you can:
1. try the external I2C access of the ADI-BERT box. You can access and configure the ADN2915s (in box)
properly via this I2C bus. ADN2915 datasheet and ADI_BERT user's guide have the ADN2915 I2C register
control details. Please note, the device I2C addresses (in box) are:
ADN2915 configured (dedicated) as PRBS generator: 1000001;
ADN2915 configured as PRBS error detector: 1000000.
2. If you have a right version Labview license, and you have ADI_BERT box,
we'd like to have a further discussion with you. My email address is: firstname.lastname@example.org.
Hope these are useful to you.
For which ADI part?
The EVALZ-ADI-BERT is a product produced by Analog, used toevaluate the ADN2915 CDR.
Here is a link to the Analog user guide:
There is a GUI for this device, but I would like tocontrol the ADI-BERT from our manufacturing test software automatically.
Is there an SCPI, SDK/Windows driver/Linux driver etc. for this device?
Retrieving data ...