AnsweredAssumed Answered

How to get the RX data in AD9361

Question asked by on Sep 22, 2014
Latest reply on Sep 23, 2014 by
Branched to a new discussion

Hi firends


We are working on the RF Performance Evaluation Board AD-FMCOMMS3-EBZ. We want to know how to get the RX data in the RX output buffer.

There is the configuration of the TX and RX part (thro integration configuration SW: OSC):

baseband signal: single tone waveform @9.28MHz, random data

carry freq: 2.4GHz

bandwidth: 18MHz

TX power: 10dBm

sampling rate: 30.72MHz


RX Freq: 2.4GHz

bandwidth: 18MHz

sampling rate: 30.72MHz

Filter: N/A

AGC: 9dB

RSSI: 32.75dB


We could see one carry single @2.4G in RX part, employ the Freq analysisor.

But we don't know how to get the RX data from the RX output buffer.

Thanks for your help.