About PV pin of ADM2483
Has internal pull-up resistors to the PV pin?
If pull-up resistance are incorporated, the number of value ?
Let me tell your advice.
The ADM2483 does not have internal pull-up resistors to the PV pin.
The ADM2483 datasheet page 17 provides some further information for the PV pin:
The PV pin should be connected to VCC during normal operation. During power up PV should be kept low until VDD1 > 2.0V and VDD2 = 3.3V. This will ensure a glitch free power up.
Thank you for the answer !
However,PV pin showed High when I open the PV pin.
The initial value Low or High?
Retrieving data ...