Can you teach me how to set up the measurement environment to get the result of AD-FMCOMMS1-EBZ Intermodulation Distortion?
For the TX path: What you need to do is the TX to two tones and have a small frequency delta in between (~1MHz) and take the output of the TX and feed it to s spectrum analyzer. you will be able to see the the two tones and the IMD3.
For the RX path: What you need to do is find a source that can generate two tones into one signal and feed that to the RX input. If you can't simply find a source that can do that, you will need to generate the two tones from two signal generators that are synced up and sum the two output and feed them to the RX input.
I hope this answered you question.
Are you using Linux or no-os?
We use Linux.
Please tell me how to set up measurement environment,that can we get the Intermodulation Distortion image like
AD-FMCOMMS1-EBZ Specifications [Analog Devices Wiki]
Thanks for answer!
Retrieving data ...