I have a question about ADV7181D.
There is a following description about 0x3D register bit7 and bit0 on Table 77 of ADV7181D_Manual_Rev0.pdf page.224.
0x3D Manual Window
Reserved bit7 = 0 Set to Default
Reserved bit0 = 1 Set to Default
However, there is a following description about 0x3D (the same register) on the script file "ADV7181D_ADV7181D@_ADV7341-VER.1.0c.txt".
42 3D A2 ; MWE Enable Manual Window, Colour Kill Threshold to 2
The "42 3D A2" indicates bit7 = 1 and bit0 = 0.
It's different from Table 77 of Manual.
Which description is correct?
How should we set the register 0x3D register bit7 and bit0?