AnsweredAssumed Answered

[ADV7181D] Register setting for 16bit output.

Question asked by Tamu on Jul 24, 2014
Latest reply on Jul 30, 2014 by Tamu


I have a question about register setting of ADV7181D.


Our use case is as follows:

   CVBS(NTSC-J) 480i or
   Y/C (NTSC-J) 480i

  YCbCr 16bit
  HS/VS/FIELD pins are used. (SAV/EAV is not used.)


Could you tell me register settings for this use case?
I think we may only change "Output Control" register (Addr:0x03) to "0x09" for 16bit output
for "##SD CVBS##:AUTODETECT CVBS IN NTSC/PAL/SECAM, 8-Bit 422 encoder:" or
"##SDP Y/C##:AUTODETECT Y/C IN NTSC/PAL/SECAM, 8 Bit 422 Encoder:"
on script file "ADV7181D_ADV7181D@_ADV7341-VER.1.0c.txt".
Is this right?
If we have to change any other register, please let me know it.


Thank you!
Best regards.