Does anyone know how to build communication between ADF4351 and Matlab?
You will have to build an interface between Matlab and the CyUSB driver. We use the driver to interface the control software to the CY7C68013-CSP microcontroller. The driver comes from Cypress Semiconductor. You may need to contact them for support.
I did a quick Google search and it looks like there is some content available: http://www.google.com/search?q=cyusb+matlab
Thanks for answering my question.
However, I still can't find a right way to do this task... Seems like lots of people asked the similar question, but there is no good solution (or maybe I didn't find it).
Do you have any example to demo the connection between ADF4351 and Matlab?
Sorry, I don't have anything for Matlab. I have LabVIEW, Visual Basic 6, and C#. I can email you any of those if you want.
It would be great if you can share the LabVIEW files with me.
I would appreciate the Visual C version of the code for similar use.
Could you e-mail the same?
You can download it here: https://ez.analog.com/message/52311#52311
Thanks! To make that Labview GUI work, do I need to install any other driver? So far it is not working on my PC....
The ADF4351 evb does not work with the Labview GUI. Did you test the GUI for ADF4351 evb?
I haven't tested it. It is old software for the ADF4350 board but the ADF4351 is very similar.
See can you find the PID variable in the LabVIEW project. Try changing this from 0xB403 to 0xB40D. (0xB403 is the ID for the ADF4350 board. 0xB40D is the ID for the ADF4351 board.)
That is the name for the file that I can find "PID variable"
I mean, What
I'm not sure. I don't have LabVIEW anymore! Start in 4350_gw_march_win_mod.vi. PID will be associated with the USB connection block.
Thank you so much!
Could you share the LabVIEW files for the ADF4350 also with me?
I have to test some parameters with different frequencies and these vi could help me very much!
Thank you very much,
Can you also email me the LabVIEW files for ADF4351?
Your mail server rejected the email.
I uploaded the files to our FTP site instead. Download here: ftp://ftp.analog.com/pub/evalcd/pb
The USB functionality may not be working. It’s been a few years since I used this. I have also uploaded LabVIEW functionality and drivers that should work. Hopefully you can combine the two projects.
Note: you use this at your own risk.
That link isn't working. Can you please upload it again?
Nevermind, I figured it out.
Are you sure? I just tested it on 2 different browsers and my phone.
No, I got it to work. Thank you!
I know its an old thread but I hope this gets to you. Do you also have some labview or vbasic code to demo the connection with HMC703LP4E evaluation board?
Please see https://ez.analog.com/message/176560?commentID=176560#comment-176560. This thread includes a link to download VB source code for the HMC830. The HMC830 SPI control is similar to the HMC703.
Retrieving data ...