The Power Amplifier ADL5324 Evaluation Board's support three segement for bias connections.
But on my project, the ADL5324 would support 400MHz~1GHz, so could you tell me how to design the matching circuit?
I moved your question to the RF Components community. Someone here should be able to assist you.
Ok, Thank you.
To begin you'll need the S-Parameters forthe part. If you haven't already downloaded them already, you may dowmload the from the ADL5320 product page on analog.com. Here is the link. http://www.analog.com/static/imported-files/eval_boards/ADL5320_Deembed_VPOS_5V_RevC.zip
The quickest way to develop the matching circuit would use a circuit design / simulation software such as Agilent ADS or AWR's Microwave office.
There also online impedance matching tools such as Circuit Sage: Tools - Circuit Sage which are quite helpful for deisgng impedance matching networks.
I have a question regarding your project, what output power level do you require?
The ADL5324 will output 15dBm for 400MHz~1GHz.
Retrieving data ...