We would like to stop output signal of Hsync, Vsync and CLK of ADV7511.If there is any method for above except power down (0X72 0X41=1), please let me know it.
0x41 = 1 powers down the part including the TMDS lines. You can only power up the part if HPD is high.
Also look at 0xA1[5:2] to control individual channels
The ADV7511 does not output control signals, just the TMDS lines. Are you really talking about the ADV7511?
Sorry for wrong question.
If there is any method for stopping clock on TMDS line , please let me know how to do it.
Thank you for your answer.
I will test using advised setting.
If there is any problem with test, I add question on this thread.
Retrieving data ...