If I only use one TX and how could I disable another TX?
-->TX1 enable and TX2 disable
I found the doc that only mention about TX attenuation setting , could you please help me to solve this problem , tks!
Register 0x002 bits D6 and D7 determine which of the two transmitters are enabled, with bit D6 corresponding to transmitter 1 and bit D7 corresponding to transmitter 2. Setting a bit enables a transmitter signal path. Clearing both bits disables both transmitters.
Register 0x004 bit D6 controls which one of the two RF output ports per transmitter output is selected. Clearing this bit selects Tx1A for channel 1 and Tx2A for channel 2 while setting the bit selects Tx1B and Tx2B.
Retrieving data ...