I am using this package for a dvi buffer which has (RGB OUTS with a clock ) how to find the default configuration of this pins
Thanks & regards
The four TMDS inputs on the ADV3003 can be connected to either R, G, B, or Clock. There is no dedicated mapping requirement. Each high speed input differential pair terminates to the 3.3 V VTTI power supply through a pair of single-ended 50 Ω on-chip resistors, as shown in Figure 25 of the datasheet. When the transmitter of the ADV3003 is disabled by setting the TX_EN control pin
as shown in Table 5 of the datasheet, the input termination resistors are also
disabled to provide a high impedance node at the inputs. Disabling the input terminations when the transmitter is disabled indicates to any connected HDMI/DVI sources that the link through
the ADV3003 is inactive.
I hope this answers your questions.
Retrieving data ...