Hi, quick question regarding the above dev kit. I see that the P2 expansion header has an SPORT interface - which pins can be used with this interface? I couldn't see any clear definition in the user manual.
On the BF526 EZ-KIT Lite it is P2 pins 13 thru 20 that expose the SPORT interface. Within the BF526 EZ-KIT Lite Evaluation System Manual, take a look at page 120 ("sheet 12 of 15" of the schematic); connector P2 is at the upper-right corner on this sheet, and you will see the 2nd 'block' or 'grouping' from the top shows the SPORT pins DTPRI, DTSEC, TSCLK, TFS, DRPRI, DRSEC, RSCLK and RFS for SPORT0A.
Thanks Craig - any idea how best to use the above pins for say I2S or SPI? Seems to be primary, secondary, clock and frame sync pins for both TX and RX, could you just use primary and clock for example?
I feel this additional question would be best asked in the Blackfin Processors community - they would be best placed to advise how to configure for I2S/SPI using the available pins.
Retrieving data ...