I have purchased ADZS-BF561-EZLITE from Digi Key.
The kit was getting heated from start. After 2 days when I was trying to connect it to PC for creating session.
I am getting error 0X80044005. I tried many times but same error code
For debugging I checked voltage across VR3. It was 1.00V (It should be 3.3V as per the schematic).
Then I checked the connectivity (after removing power cord) across VR3 in between pin no 1 and 2 , It was showing short on DMM.
I am not able to work on my kit. Please convey how to solve this problem.
Looking for your prompt response..
- Shivam K.