ADDI7013 has a reduced range lvds output ( 200mv). My FPGA mini lvds input range is 200-600mv as receiver.
Is it safe to use mini lvds as the receiver?
ADI7013 's pixel rate is 75Mhz. Does it work with 20MHz or 30MHz pixel rate?
The ADDI7013 specifies 200mV typical for the differential output swing, but the minimum can be less than 200mV. I don't know what the FPGA's receiver threshold is, whether this is OK or not.
Yes, the ADDI7013 can also operate at 20 MHz or 30 MHz pixel rates.
Can you email me the datasheet (full, not one page) of ADDI7013 , AD9928
On Mon, May 5, 2014 at 6:40 PM, EBarnes <
Retrieving data ...